===== Router Configuration =====
 --- //[[colm.carew@errigal.com|Colm Carew]] 2017/08/14 07:14//
===== Creating Backup of Config File =====
This is relatively easy and should be done once every week or two or before and after changes are made to the router :

  * Login to the UI : https://10.5.5.1/index.html
  * Click Configuration -> Update -> Config File
  * Click Save to File
  * You should have a ~cfg.txt file
  * Move this file to Dropbox/Errigal Shared Documents/Router Config - where the other router configs are and rename the file as appropriate


===== Apply Config File to Router =====
This is relatively easy and should be done once every week or two or before and after changes are made to the router :

  * Login to the UI : https://10.5.5.1/index.html - or whatever the URL is
  * Click Configuration -> Update -> Config File
  * Ensure Replace Current Configuration is check and that Merge is NOT checked
  * Choose the appropriate config file you want to upload 
  * Click apply and click yes to every pop up you get (should be about 3)
  * Wait for the router to restart and do some basic sanity checks that router turns on and you're assigned an appropriate IP etc.

===== Adding a custom service/custom port forward =====

For a UI version please check : [[toolsandtechnologies:netgearRouterNewForwardingRule| Create a New Forwarding Rule on the Router (Juniper Netscreen Router)]]

===== SSH to router =====

  * The router in the Ireland Office is a Juniper NetScreen NS5GT.
  * Its public ip address is ''212.17.60.121''
  * Its private ip address is ''10.5.5.1''
  * The only way to access the router config from the UNTRUST side (via the public ip address) is via SSH through port 3774.
  * The router can be accessed via the WebUI from the TRUST + UNTRUST interface (private or public IP) in addition to SSH on the same port as the UNTRUST.
   <code bash>ssh errigaladmin@10.5.5.1 -p3774</code>