Internal Errigal Collaboration Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Set up PPPoE Information on Juniper 5GT 101 ======
 --- //[[colm.carew@errigal.com|Colm Carew]] 2017/08/18 01:44//
===== How To =====
Note for the Waterford Setup all Password and Information should be located inside the password safe - look for PPPoE

This is for if the VDSL router has been changed to modem mode and we need to enter the VDSL info onto the juniper 5GT 101
  * Browse to the juniper router 10.5.5.1 and log in
  * Go to Network -> PPP -> PPPoE Profile and click new
{{ :databaseandnetworkmanagement:screenshot_2017-08-18_09.42.05.png |}}

  * Fill in the PPPoE Instance to be a suitable name
  * Bound it to the untrust interface
  * Username and password have to be obtained from the ISP (VLANID may also be given but should not be needed here)
  * Change the netmask to be the netmask they provided (shouldn’t cause issue if left as default)
  * Click save and if you click edit it should look similar to this:
{{ :databaseandnetworkmanagement:screenshot_2017-08-18_09.43.07.png |}}
  * Next go to Network -> Interfaces -> Untrust and click edit on this
  * The Obtain IP using PPPoE should be selected and the Name of the PPPoE profile should have been automatically selected from the dropdown
{{ :databaseandnetworkmanagement:screenshot_2017-08-18_09.43.58.png |}}
  * The device should now be able to connect to the internet and have the public ip address assigned to the juniper router as the modem is not only a modem.

Sidebar

Internal Errigal Collaboration Wiki

User Tools

Site Tools

Page Tools